Archive for April 2011
What could be cooler than an economical scooter? How about one with an extra dose of attitude. The 2011 Honda Ruckus® is Honda's bare-knuckle scooter that sets a new standard for cool.
Want to blend in? Then forget about a Ruckus. Because this machine packs way more attitude than bikes twice its size. Sure, the thrifty 49cc engine gets you where you need to go and hardly uses any gas doing it. Urban riding couldn't be easier thanks to the V-matic® automatic transmission and electric starter. And best of all the Ruckus is built tough so it can handle all the bumps and dings that modern life dishes out, but does it with a style all its own.
2011 Honda Ruckus NPS50 - United States of America Specifications
Model: NPS50
Engine Type: 49cc liquid-cooled single-cylinder four-stroke
Induction: 15mm CV carburetor with automatic choke
Ignition: CD
Transmission: Automatic V-Matic belt drive
Suspension Front: Twin-downtube fork; 2.2 inches travel
Rear: Single shock; 2.6 inches travel
Brakes Front: Drum
Rear: Drum
Tires Front: 120/90-10
Rear: 130/90-10
Wheelbase: 49.8 inches
Seat Height: 28.9 inches
Fuel Capacity: 1.3 gallons
Estimated Fuel Economy: 114 MPG
Colors: Orange/Black, Black
Curb Weight*: 194 pounds
*Includes all standard equipment, required fluids and full tank of fuel--ready to ride.
Honda's fuel-economy estimates are based on EPA exhaust emission measurement test procedures and are intended for comparison purposes only. Your actual mileage will vary depending on how you ride; how you maintain your vehicle; weather; road conditions; tire pressure; installation of accessories; cargo, rider and passenger weight; and other factors.
Meets current EPA and State of California emissions standards.
Featuring long, low lines that embody what cruising is all about, the Stateline blends two worlds of motorcycling style: traditional looks plus progressive elements. The deeply valanced fenders arc downward in classic retro style, yet the all-new rolling chassis and overall lines bring a fresh look to the class. Add to that the deep throaty rumble of a big V-twin engine and that classic big Vee power pulse, and you have a machine that's the perfect choice for cruising-anytime you want.
Long and low, with a no-nonsense attitude and the performance to back it up. The Honda VT1300CRA Stateline is a motorcycle that grabs your attention and won't let go. Its all-new chassis includes an aggressively raked front end that looks radical, yet handles with the composure you'd expect from a Honda cruiser. The 1,312 cc V-twin engine uses Honda's Programmed Fuel Injection (PGM-FI) for crisp throttle response, and other high-tech features such as three-valve cylinder heads and two spark plugs per cylinder help to produce the wide, strong powerband that makes riding a big cruiser so much fun.
Call it the perfect fusion of traditional and progressive cruiser design, featuring all the classic cues that make the Fury and Sabre so cool, plus a few twists that are decidedly neo-retro, like deep, long fenders.
The brawny 1312cc liquid-cooled, fuel-injected 52º V-twin is a thing of beauty, too, with smooth, maintenance-free shaft final drive putting all that torque and power to the ground with effortless ease.
See what happens when you build a custom that’s equal parts old school and new. Then look no further than the Stateline.
011 Honda Stateline VT1300CRA ABS - United States of America Specifications
Model: VT1300CRA
Engine Type: 1312cc liquid-cooled 52° V-twin
Bore and Stroke: 89.5mm x 104.3mm
Compression ratio: 9.2:1
Valve Train: SOHC; three valves per cylinder
Induction: PGM-FI with automatic enrichment circuit, one 38mm throttle body
Ignition: Digital with 3-D mapping, two spark plugs per cylinder
Transmission: Five-speed
Final Drive: Shaft
Suspension
Front: 41mm fork; 4.0 inches travel
Rear: Single shock; 3.9 inches travel
Brakes
Front: Single 336mm disc with twin-piston caliper
Rear: 296mm disc with single-piston caliper
Tires
Front: 140/80-17
Rear: 170/80-15
Wheelbase: 70.3 inches
Rake (Caster Angle): 33.0°
Trail: 118.0mm (4.6 inches)
Seat Height: 26.8 inches
Fuel Capacity: 4.4 gallons
Estimated Fuel Economy: 46 mpg
Color: Metallic Silver
Curb Weight*: 672 pounds
*Includes all standard equipment, required fluids and full tank of fuel-ready to ride.
Honda's fuel-economy estimates are based on EPA exhaust emission measurement test procedures and are intended for comparison purposes only. Your actual mileage will vary depending on how you ride; how you maintain your vehicle; weather; road conditions; tire pressure; installation of accessories; cargo, rider and passenger weight; and other factors.
Meets current EPA standards.
Models sold in California meet current CARB standards and may differ slightly due to emissions equipment.
The Sportster® 1200 Low combines performance, agility and easy-to-handle ergonomics in a long, premium cruiser that is ready for all takers. Born on the gritty dirt tracks and drag strips of the 1950s, the Harley-Davidson® Sportster represents the uninhibited essence of motorcycling. Today’s Sportster combines soulful styling with the flat torque delivery and distinctive sound of an American V-Twin engine. Among the more affordable Harley-Davidson models, Sportster motorcycles offer a low, comfortable seat and smooth clutch effort.
2011 Harley-Davidson XL 1200L Sportster 1200 Low - USA Specifications
DIMENSIONS
Length 89.1 in. (2263 mm)
Overall Width 35.2 in. (894 mm)
Overall Height 46.8 in. (1189 mm)
Seat Height:
• Laden2 26.3 in. (668 mm)
• Unladen 28.0 in. (711 mm)
Ground Clearance 4.4 in. (112 mm)
Rake (steering head) 30.4°
Fork Angle 30.4°
Trail 4.6 in. (117 mm)
Wheelbase 60.1 in. (1527 mm)
Tires (Dunlop® Harley-Davidson Series, blackwall):
• Front – D401F 100/90-19 57H
• Rear – D401 150/80B16 71H
Fuel Capacity 4.5 gal. (17.0 L)
(warning light at approximately 1.0 gal.)
Oil Capacity (w/filter) 2.8 qts. (2.6 L)
Transmission Capacity 1.0 qts.
Weight:
• As Shipped 557 lbs. (252.7 kg)
• In Running Order 581 lbs. (263.5 kg)
• Gross Vehicle Weight Rating 1000 lbs. (453.6 kg)
• Gross Axle Weight Rating
• Front 335 lbs. (152.0 kg)
• Rear 665 lbs. (301.6 kg)
ENGINE
Engine3 Air-cooled, Evolution®
Valves Pushrod-operated, overhead valves with hydraulic, self-adjusting lifters; two valves per cylinder
Bore x Stroke 3.5 in. x 3.812 in. (88.9 mm x 96.8 mm)
Displacement 73.3 cu. in. (1200 cc)
Compression Ratio 9.7:1
Fuel System3 Electronic Sequential Port Fuel Injection (ESPFI)
Air Cleaner Paper cartridge type
Lubrication System Dry-sump
DRIVETRAIN
Primary Drive Chain, 57/38 ratio
Final Drive Belt, 68/29 ratio
Clutch Multi-plate, wet
Transmission 5-speed
U.S. Gear Ratios (overall):
• 1st 9.315
• 2nd 6.653
• 3rd 4.948
• 4th 4.102
• 5th 3.517
CHASSIS
Frame Mild steel, tubular frame; circular sections; cast junctions Swingarm Mild steel, rectangular tube section, stamped junctions; MIG welded
Front Forks 39 mm
Rear Shocks Coil-over; preload dual-adjustable
Wheels4 (Chrome, Laced Steel option):
Black, 13-Spoke Cast Aluminum
• Front 19 in. x 2.15 in. (483 mm x 55 mm)
• Rear 16 in. x 3 in. (406 mm x 76 mm)
Brakes:
• Caliper Type Dual-piston front, single-piston rear
• Rotor Type (diameter x width): Patented, uniform expansion rotors
• Front 11.5 in. x .2 in. (292 mm x 5 mm)
• Rear 10.24 in. x .28 in. (260 mm x 7 mm)
Suspension Travel:
• Front Wheel 4.12 in. (105 mm)
• Rear Wheel 2.12 in. (54 mm)
PERFORMANCE
Engine Torque5 (per SAE J1349):
• North America 79 ft. lbs. @ 4000 RPM (107 Nm @ 4000 RPM)
Lean Angle:
• Right 30°
• Left 31°
Fuel Economy6
(EPA urban/highway test) 42/57 mpg (5.60/4.13 L/100 km)
ELECTRIC
Battery (per Battery Council International Rating)
Sealed, maintenance-free, 12V, 12-amp/hour, 200 cca
Charging Single-phase, 30-amp system (357W @ 13.5V, 2000 RPM, 405W max power @ 13.5V)
Starting 1.2 kW electric with solenoid shift starter motor engagement
Lights (as per country regulation):
• Headlamp (quartz halogen) 55-watt low beam, 60-watt high beam
• Tail/Stop Lights 8W/28W (5W/21W)
• Turn Signal Lights 28W (21W) self-canceling
• Indicator Lamps - High beam, neutral, low oil pressure,
turn signals, engine diagnostics,
low fuel warning, low battery, security
system7 (optional)
COLOR OPTIONS
Solids
• Vivid Black
• Cool Blue Pearl
• Merlot Sunglo
WARRANTY
Warranty8 24 months (unlimited mileage)
Service Interval First 1,000 miles (1,600 km), every 5,000 miles (8,000 km) thereafter
1 Vehicles depicted may differ from vehicles manufactured and delivered.
Specifications and prices listed may differ from specifications and prices
of vehicles manufactured and delivered. All product descriptions (including
depictions, specifications, dimensions, measurements, ratings and competitive
comparisons) are based on available information at the time of publication.
Although such descriptions are believed correct, errors and changes can
occur and complete accuracy cannot be guaranteed. Harley-Davidson may
make changes at any time to prices and specifications, and may change
or discontinue models, without notice and without incurring any obligation.
Attention: Vehicles in the configurations shown and many of the accessories
described in this catalog may not be available for sale or use in some locations.
Please check with your dealer for complete product details and the latest
information. All models feature 6-speed transmission (VRSC™ models and
Sportster® models are 5-speed) and carbon fiber belt final drive; multi-plate
clutch with diaphragm spring in oil bath; and 2-year unlimited mileage warranty.
2 Measurement reflects 180 lb. (81.7 kg) operator weight.
3 Recommended 91 octane or higher fuel (R+M)/2.
4 Standard and optional wheels may vary by country and region.
5 Values shown are nominal. Performance may vary by country and region.
6 Estimated from fuel economy tests on a sample motorcycle from the
corresponding family conducted by Harley-Davidson under ideal laboratory
conditions. Not all motorcycle models undergo fuel economy testing. Fuel
economy and mileage may vary among motorcycle models within a family. Your
mileage may vary depending on your personal riding habits, weather conditions,
trip length, vehicle condition and vehicle configuration and other conditions.
Break-in mileage may vary.
7 North America security system includes immobilizer; outside North America the
security system includes immobilizer and siren.
8 See motorcycle owner’s manual for complete details.
The SuperLow™ is easy to own and fun to ride. Balanced and responsive handling help rider and machine glide through corners with smooth confidence. The combination of wheel size, radial tires and front-end geometry contribute to outstanding maneuverability. The final drive ratio is matched to the rear wheel size to provide smooth acceleration. Generous rear-suspension travel, a deeply cushioned seat and easy-reach handlebar offer outstanding comfort. A low seat height, the broad V-Twin powerband and clean styling complete a package that will make the SuperLow appealing to many riders.
The new Harley-Davidson SuperLow model reintroduces the pure pleasure of motorcycling. Balanced and responsive handling help rider and machine glide through corners with smooth confidence. A low seat height, the broad V-Twin powerband and clean styling complete an appealing package. The SuperLow is an open invitation to get out and ride.
2011 Harley-Davidson XL 883L Sportster 883 SuperLow - USA Specifications
DIMENSIONS
Length 86.1 in. (2187 mm)
Overall Width 36.6 in. (929 mm)
Overall Height 47.6 in. (1209 mm)
Seat Height:
o Laden2 25.5 in. (648 mm)
o Unladen 26.8 in. (681 mm)
Ground Clearance 3.8 in. (97 mm)
Rake (steering head) 31°
Fork Angle 29.6°
Trail 5.7 in. (145 mm)
Wheelbase 59.3 in. (1506 mm)
Tires (Michelin® Scorcher™ "11" front and rear):
o Front - Scorcher™ "11"
o Rear - Scorcher™ "11" 120/70 ZR-18 150/60 ZR-17
Fuel Capacity 4.5 gal. (17.0 L) (warning light at approximately 1.0 gal.)
Oil Capacity (w/filter) 2.8 qts. (2.6 L)
Transmission Capacity 1.0 qts.
Weight:
o As Shipped 536 lbs. (234.1 kg)
o In Running Order
o Gross Vehicle Weight Rating 563 lbs. (255.4 kg)
o Gross Axle Weight Rating 1000 lbs. (453.6 kg)
o Front 339 lbs. (154.0 kg)
o Rear 661 lbs. (300.0 kg)
ENGINE
Engine3 Air-cooled, Evolution®
Valves Pushrod-operated, overhead valves with hydraulic, self-adjusting lifters; two valves per cylinder
Bore x Stroke 3 in. x 3.812 in. (76.2 mm x 96.8 mm)
Displacement 53.9 cu. in. (883 cc)
Compression Ratio 8.9:1
Fuel System3 Electronic Sequential Port Fuel Injection (ESPFI)
Air Cleaner Paper cartridge type
Lubrication System Dry-sump
DRIVETRAIN
Primary Drive Chain, 57/34 ratio
Final Drive Belt, 68/29 ratio
Clutch Multi-plate, wet
Transmission 5-speed
U.S Gear Ratios (overall):
o 1st 10.407
o 2nd 7.436
o 3rd 5.53
o 4th 4.583
o 5th. 3.93
CHASSIS
Frame Mild steel, tubular frame; circular sections; cast junctions
Swingarm Mild steel, rectangular tube section, stamped junctions; MIG welded
Front Forks 39 mm Showa®
Rear Shocks Coil-over; preload dual-adjustable
Wheels4: Black, Split 5-Spoke with Machined Rim
o Front 18 in. x 3.5 in. (457 mm x 89 mm)
o Rear 17 in. x 4.5 in. (432 mm x 114 mm)
Brakes:
o Caliper Type Dual-piston front, single-piston rear
o Rotor Type Patented, uniform expansion rotors (diameter x width):
o Front 11.5 in. x .2 in. (292 mm x 5 mm)
o Rear 10.24 in. x .28 in. (260 mm x 7 mm)
Suspension Travel:
o Front Wheel 4.26 in. (108 mm)
o Rear Wheel 2.12 in. (54 mm)
PERFORMANCE
Engine Torque5 (per SAE J1349):
o North America 55 ft. lbs. @ 3500 RPM (75 Nm @ 3500 RPM)
Lean Angle:
o Right 24.7°
o Left 24.4°
Fuel Economy6
(EPA urban/highway test) 45/60 mpg (5.23/3.92 L/100 km)
ELECTRIC
Battery (per Battery Council International Rating) Sealed lead acid, maintenance-free, 12V, 12 amp/hour, 200 cca
Charging 30-amp, permanent magnet, single-phase alternator with solid-state regulator (405W @ 3000 RPM, 405W peak)
Starting 1.2 kW electric with solenoid shift starter motor engagement
Lights (as per country regulation):
o Headlamp (quartz halogen) 55-watt low beam, 60-watt high beam
o Tail/Stop Lights 8W/28W per lamp
o Turn Signal Lights 28W self-canceling
o Indicator Lamps High beam, neutral, low oil pressure, turn signals, engine diagnostics, low fuel warning, low battery, security system7 (optional)
WARRANTY
Warranty8 24 months (unlimited mileage)
Service Interval First 1,000 miles (1,600 km), every 5,000 miles (8,000 km) thereafter
1 Vehicles depicted may differ from vehicles manufactured and delivered. Specifications and prices listed may differ from specifications and prices of vehicles manufactured and delivered. All product descriptions (including depictions, specifications, dimensions, measurements, ratings and competitive comparisons) are based on available information at the time of publication. Although such descriptions are believed correct, errors and changes can occur and complete accuracy cannot be guaranteed. Harley-Davidson may make changes at any time to prices and specifications, and may change or discontinue models, without notice and without incurring any obligation. Attention: Vehicles in the configurations shown and many of the accessories described in this catalog may not be available for sale or use in some locations. Please check with your dealer for complete product details and the latest information. All models feature 6-speed transmission (VRSC™ models and Sportster® models are 5-speed) and carbon fiber belt final drive; multi-plate clutch with diaphragm spring in oil bath; and 2-year unlimited mileage warranty.
2 Measurement reflects 180 lb. (81.7 kg) operator weight.
3 Recommended 91 octane or higher fuel (R+M)/2.
4 Standard and optional wheels may vary by country and region.
5 Values shown are nominal. Performance may vary by country and region.
6 Estimated from fuel economy tests on a sample motorcycle from the corresponding family conducted by Harley-Davidson under ideal laboratory conditions. Not all motorcycle models undergo fuel economy testing. Fuel economy and mileage may vary among motorcycle models within a family. Your mileage may vary depending on your personal riding habits, weather conditions, trip length, vehicle condition and vehicle configuration and other conditions. Break-in mileage may vary.
7 North America security system includes immobilizer; outside North America the security system includes immobilizer and siren.
8 See motorcycle owner's manual for complete details.
Moto Guzzi California 2011
Research the 2011 Moto Guzzi California Standard with the information in our new motorcycle Buyer’s Guide. Our buyer’s guide provides new motorcycle pricing information, photos and colors, specification data and more.
Performance
Horsepower (bhp): 73.4 bhp
Torque (Ft Lbs): 69.3 lbs
Redline RPM: N/A RPM
Exterior
Body Material: N/A
Frame: Steel
Hand Grip Material: Rubber
Transmission
Number Of Speeds: 5
Transmission Brands: N/A
Transmission Types: Manual
Instrumentation
Speedometer: Standard
Tachometer: Standard
Fuel Level Warning: Not Available
Wheels
Rear Wheel Diameter: 17
Front Wheel Width (in): 2.5
Rear Wheel Width (in): 3.5
Bags & Storage
Tank Bag: N/A
Saddle Bag(s): Not Available
Lockable Storage: Standard
Tires
Front Tire Speed Rating: VB
Rear Tire Speed Rating: VB
Tire Brand: N/A
Fuel Economy
US MPG (City): N/A
US MPG (Combined): N/A
US MPG (Hwy): N/A
Brakes
Front Caliper Pistons: 4
Rear Caliper Pistons: 2
Rear Brake Rotor Width (mm): N/A
Suspension & Steering
Front Suspension Brand: Marzocchi
Front Suspension Type: Telescopic Fork
Rear Suspension Type: Twin Sided Swing Arm
Seats
Seat Height (mm): 780
Seat Material: Vinyl
Seat Type: One-Piece
Other Specs
Fuel Capacity (gal): 5
Number Of Speakers: N/A
Adjustable Handlebars: Not Available
Source: http://www.motorcyclecruiser.com/2011/moto_guzzi/california/specifications/05/index.html
King of the Open Class.
With the CBR1000RR, Honda literally rewrote the rules for the sporting literbike class. Rated best by one magazine after another, the revolutionary CBR1000RR has established new standards for light weight, superlative handling, remarkably compact dimensions and exceptional performance. Also available with our high-tech electronically controlled Combined ABS for the ultimate in sophisticated sportbike braking performance, the CBR1000RR remains the yardstick to which all others are compared.
You want performance? You want style? Then you want a Honda CBR1000RR. Designed to be the ultimate streetbike, it’s been refined to perfection on World Superbike tracks across the globe. In addition to its powerful engine and refined chassis the CBR1000RR showcases state-of-the-art features no other sportbike can match, like our electronically controlled Combined ABS and the revolutionary Honda Electronic Steering Damper (HESD). The result is one of the most awesome literbikes on the planet, but also one that’s so refined it’s a joy to ride. And after all, isn’t that exactly what you’d expect from a Honda?
New for 2011
- Repsol Edition returns along with an exciting new Red/Black and all Black color schemes. C-ABS model available in Red/Black only.
- All colors have silver frames and silver swingarm.
The Details make the Difference.
The CBR1000RR is a perfect example of typical Honda industry-leading innovation. Combining tons of power, light weight, and refined, responsive handling with drop-dead good looks, it’s equally at home carving your favorite canyon as it is collecting wins on World Superbike podiums. That's the CBR1000RR—the ultimate liter-class sportbike experience.
Stop That! - The CBR1000RR (along with the CBR600RR) are breaking new ground by offering one of the most innovative braking systems ever: Honda’s revolutionary Combined ABS.
Combined Anti-Lock Braking (C-ABS) - All-new, electronically controlled Combined ABS distributes brake force over both wheels, helping to maintain braking confidence in less than ideal conditions. Electronic measurement of rider input on each brake lever permits application of only the front or rear brake in some cases, while the system combines both brakes in others.
Unit Pro-Link Suspension - By eliminating the frame-mounted top shock mount, Unit Pro-Link isolates the chassis from bumps, resulting in more precise handling and better traction. Developed on Honda's championship-winning MotoGP bikes, it's a perfect example of the CBR's superior engineering.
MotoGP-Style Exhaust - The CBR1000RR's lowboy muffler not only looks cool and sounds great, it also offers a handling advantage by moving the silencer lower and closer to the bike's center of mass. GP bikes do that to make the machines more responsive, and you get the same benefit with the CBR1000RR.
Slipper Clutch - The CBR1000RR uses a patented slipper-clutch design with a special cam-assist mechanism for easier actuation. That means you get a light feel at the lever, the feedback a cable system provides, and all the backtorque-limiting benefits a slipper clutch provides.
Twin-Spar Aluminum Chassis - By varying the wall thickness of the chassis' main elements, our engineers can fine-tune chassis rigidity precisely, and in individual areas. You get a frame that offers the perfect balance of a stable riding platform but with no harshness.
Dual-Stage Fuel Injection - Two injectors per cylinder – one primary and one secondary – controlled by an ECU that senses RPM and throttle opening, ensure both low- and high-rpm performance. You get near instantaneous high-rpm response, along with great low-rpm metering and clean running.
Centrally Located Fuel Tank - Centrally located fuel tank increases mass centralization for a more compact frame design.
Idle Air Control Valve - Idle air control valve minimizes torque reaction and smoothes response to small throttle changes through gradual reductions of air and fuel intake when throttle is opened and closed.
Two-Stage Ram Air - Nose mounted, two-stage ram air system provides a high volume of cool air to the airbox, for linear power delivery and superb engine performance.
Honda Multi-Action System (HMAS) Inverted Fork - The HMAS cartridge fork features an exclusive internal piston construction. This innovative design employs smaller-diameter pistons to keep oil velocity high for improved damping characteristics and an expanded range of adjustability. The result: you get more precise suspension performance, especially over smaller surface irregularities.
Radial Front-Brake Calipers - The CBR1000RR's radial-mounted monoblock front-brake calipers are stiffer, for better brake feel and performance. Each caliper uses four chromium-plated aluminum pistons that squeeze lightweight 320mm floating discs for exceptional stopping power.
Honda Electronic Steering Damper
Power is one thing, but the key to a great sportbike is how it handles, and that’s where the Honda Electronic Steering Damper (HESD) comes in. Compact, unobtrusive and super-smart, it helps maintain smoothly predictable high-speed handling and low-speed maneuverability.
Follow The Leaders
Honda has always used racing to improve our sportbikes, and the CBR1000RR is a great example. A major force in the World Superbike Championship, you can follow Honda’s performance and catch up on Team Honda's highlights on our racing pages.
Honda Genuine Accessories
- Color-Matched Passenger Seat Cowl
- CBR® Racing Cycle Cover (for indoor use)
- Carbon-Fiber Accents
- Carbon Fiber License Plate Frame
- Outdoor Cycle Cover
- "E-Cushion" Seat for greater comfort
- Rear Tire Hugger
- HRC Power-Up Kit for Racing (Track Use Only)
2011 Honda CBR1000RR - United States of America Specifications
USA MSRP - $TBA USD
Model: CBR1000RR / CBR1000RR C-ABS
Engine Type: 999cc liquid-cooled inline four-cylinder
Bore and Stroke: 76mm x 55.1mm
Compression ratio: 12.3:1
Valve Train: DOHC; four valves per cylinder
Induction: Dual Stage Fuel Injection (DSFI)
Ignition: Computer-controlled digital transistorized with 3-D mapping
Transmission: Close-ratio six-speed
Final Drive: #530 O-ring-sealed chain
Suspension
Front: 43mm inverted HMAS cartridge fork with spring preload, rebound and compression damping adjustability; 4.3 inches travel
Rear: Unit Pro-Link HMAS single shock with spring preload, rebound and compression damping adjustability; 5.4 inches travel
Brakes
Front: Dual radial-mounted four-piston calipers with full-floating 320mm discs
Rear: Single 220mm disc;
Optional Honda Electronic Combined ABS
Tires
Front: 120/70ZR-17 radial
Rear: 190/50ZR-17 radial
Wheelbase: 55.4 inches
Rake (Caster Angle): 23.3°
Trail: 96.2mm (3.8 inches)
Seat Height: 32.3 inches
Fuel Capacity: 4.7 gallons, including 1.06-gallon reserve
Estimated Fuel Economy: 37 mpg
Colors:
CBR1000RR: Repsol Edition, Red/Black, Black
CBR1000RR C-ABS: Red/Black
Curb Weight*: 439 pounds (CBR1000RR) / 462 pounds (CBR1000RR C-ABS)
*Includes all standard equipment, required fluids and full tank of fuel-ready to ride.
Honda's fuel-economy estimates are based on EPA exhaust emission measurement test procedures and are intended for comparison purposes only. Your actual mileage will vary depending on how you ride; how you maintain your vehicle; weather; road conditions; tire pressure; installation of accessories; cargo, rider and passenger weight; and other factors.
Meets current EPA standards.
Models sold in California meet current CARB standards and may differ slightly due to emissions equipment.
Source: http://www.totalmotorcycle.com/
You’ll know you’re on a powerful ride from the moment you push the KFX®450R’s electric starter. Having a lightweight aluminum frame, long lower front A-arm suspension and a fully adjustable rear shock, this ATV offers track winning handling and confidence-inspiring stability to compliment its powerful engine.
Sharing engine features with the highly acclaimed KX™450F motocrosser, the KFX450R is ready to race. Equipped with titanium valves to keep reciprocating weight low, the engine is fitted with a highly responsive 32-bit digital fuel injection (DFI®) system that automatically compensates for temperature or altitude.
DFI enhances the KFX450R’s ability to translate its four-stroke power into outstanding thrust, with easily accessible torque in the low- and medium-rpm ranges. The fast and reliable KFX450R ATV also includes a lightweight reverse gear system integrated with its five-speed manual transmission. The KFX450R’s reverse gear allows riders to quickly and easily extricate themselves from first turn chaos, trail bottlenecks or any other on-track incident, using the normal shift lever, plus a convenient handlebar mounted lock-out lever.
Built to handle tough trail conditions and win races, the KFX450R’s lightweight all-aluminum frame has both incredible stiffness and significant strength. The high-tech chassis also provides a low center of gravity and excellent roll resistance for higher corner speeds and race-level handling.
The front suspension design utilizes long lower A-arms mounted to a single box-section lower frame tube, paired with dual-rate front springs for excellent rough-terrain handling. In the rear, an adjustable shock with low- and high-speed compression and rebound damping adjustability is mated to a cast aluminum swingarm that offers the ideal balance of flexibility and rigidity. Regardless of track surfaces or conditions, this race-oriented chassis makes the KFX450R ATV a potent weapon.
The KFX450R ATV is easy to work on, so owners can spend more time in the dirt than in the garage. The two-piece front and rear “lapped” fenders make it easier to customize the size of the fenders or quickly replace damaged sections. Even the headlight assembly is quickly detachable for closed-course races — this ATV looks just as aggressive with or without headlights. These features leave little doubt that the KFX450R was designed to be on the track and winning races as quickly as possible.
Owners can customize their KFX450R, using a full line of Authentic Kawasaki Accessories from their local Kawasaki dealer.
As with all off-highway vehicle recreation, Kawasaki encourages ATV riders to ride responsibly and to respect the environment. Kawasaki will pay first-time buyers of a new Kawasaki ATV $100 for completing an ATV rider safety course conducted by the ATV Safety Institute (ASI).
449cc Liquid-cooled, DOHC, Four-valve, Four-stroke single
• Lightweight forged piston reduces reciprocating weight
• Triple piston rings and a 21mm diameter piston pin help increase durability and reduce necessary maintenance
• Lightweight titanium valves and aluminum valve spring retainers reduce reciprocating weight and boost high-rpm reliability
• Asymmetrical high-acceleration cams yield high intake efficiency
• Electric starting facilitates quicker stall recovery and lowers rider fatigue
• Large-volume airbox contributes to both intake efficiency and sharp engine response. An air duct fashioned from polyethylene resists deformation caused by intake pulses and helps ensure stable engine performance• Advanced engine tuning provides a broad torque curve and an optimized power delivery for quick acceleration without excessive wheelspin
Digital Fuel Injection (DFI)
• 32-bit digital fuel injection system with a 42mm throttle body
• System measures coolant temperature, air intake temperature, air intake pressure, engine speed and throttle position, then automatically delivers the ideal amount of fuel to optimize power delivery
• Crisp engine response is especially advantageous for instant acceleration after landing from jumps
• Promotes trouble-free starting — a great benefit in races with engine off starts
• Fuel injection allows the use of a lighter throttle return spring, which reduces rider fatigue
Transmission
• 5-speed (one-down, four-up) manual transmission locates reverse below first gear
• Actuating the reverse-lock release lever when in first gear allows rider to shift “down” into reverse
• Compact reverse-lock release lever can be activated with the right thumb, allowing the reverse gear to be engaged while still keeping the front brake lever depressed
• The combined weight of the reverse gear system and the lightweight aluminum chassis is no heavier than a steel frame without reverse
Aluminum Chassis
• Highly rigid frame contributes to the KFX’s excellent handling and traction
• The aluminum frame’s high torsional rigidity enhances stability in corners and allows the suspension to be easily set up to suit course conditions
• Designed for high corner speeds, the KFX450R sits low to the ground, helping to reduce roll tendencies
• Mounting the battery and coolant tank ahead of the engine lowers the center of gravity, and helps weight the front wheels for increased traction
• Single box-tube lower frame contains the front A-arm attachment points. This narrower design enables the use of longer lower A-arms
Advanced Suspension Design
• Dual-rate front springs deliver progressive suspension travel for excellent rough-terrain handling
• Extra-long lower front A-arms minimize camber variations through the suspension stroke, maximize front wheel traction and boost stability
• Rear shock features both low
• and high-speed compression adjustability and adjustable rebound damping
• The curved lines and rounded edges of the cast aluminum rear swingarm help disperse stress, which along with its varied wall thicknesses equal a design that is both light and strong
• The swingarm’s high torsional rigidity contributes to excellent rear wheel traction
• The rear axle is tapered for less unsprung weight
Front and Rear Disc Brakes
• Dual front hydraulic disc brakes offer strong, consistent stopping performance
• Petal-type rear brake rotors reduce unsprung weight and help clean the brake pads for more efficient braking performance
• Integrated rear parking brake is designed to be easily engaged and released while wearing gloves. When engaged, the parking brake lever also prevents the clutch lever from being actuated
Improved Water Resistance on Wiring Harness• Resin-molded lead branch points
• PVC cover over the connectors for regulator and TPS
• Longer colgate tube for tail light leads
Don’t say we didn’t warn you—one look and you won’t be able to tear your eyes off the gorgeous Interstate custom. Like its equally stunning Stateline stable mate, this 1312cc V-twin is the ultimate expression of progressive retro cruiser styling, with one big difference: It’s built to go the (long) distance, with touring features like floorboards, roomy leather-clad saddlebags, and a custom windscreen.
So we won’t mind if we catch you staring. In fact, we fully expect it.
Cross-town or Cross-country, this Motorcycles made to cruise.
The Interstate is a looker, a stunner—first and foremost. Better still, since this is a Honda, you know the beauty runs much more than skin deep, showcasing engineering and innovative features like that beefy 1312cc 52º V-twin with Programmed Fuel Injection and smooth, maintenance-free shaft drive. A plush, deep-dish saddle, full-size floorboards and a custom touring windscreen make all-day cruising a breeze, while roomy saddlebags let you pack enough for … well, that’s completely up to you.
Sonic Vroom.
With its potent 1312cc, 52º V-twin, the Interstate delivers strong low- and mid-range torque, ample passing power, and a pulsing exhaust note that is downright hypnotic.
Long-Range Luxury.
No matter where, or how long, your ride takes you, the Interstate will get you there in style and comfort, thanks to spacious saddlebags, full-size floorboards and a large, custom windscreen.
Brake Time.
A 336mm front and a 296mm rear disc brake ensures strong stopping power and control.
Features
Touring equipped. Room to stretch out. Windscreen and saddlebags. Floorboards and fork covers.
1312cc liquid-cooled 52-degree V-twin – Powerful 1312cc, 52-degree V-twin engine with a single-pin crankshaft and dual balancers has plenty of torque, and the feel only a V-twin can deliver.
Full sized floorboards – A must-have for every long-distance machine: large, roomy floorboards, with vibration-absorbing rubber inserts, to keep your size-12 dogs relaxed all day long.
Programmed Fuel Injection (PGM-FI) – Forget about fiddling with a choke—the Interstate’s fuel-injection system means no-hassle startups on cold mornings or at high altitudes, and optimal performance in any condition.
Front and Rear Disc Brakes – Equipped with powerful stoppers at both ends—a single 336mm disc with twin-piston caliper up front and 296mm disc with single-piston caliper in back—the Interstate excels at reeling in the mph.
Hardcover Saddlebags – Roomy and built with stylish leather overlaying a protective hard case and cover, the Interstate’s saddlebags are big enough to pack for a long trip—and durable enough to take it.
Shaft Final Drive – The shaft final drive is quiet, clean, and has been uniquely integrated into the overall design.
Low-Slung Saddle – Measuring in at a low, easy-to-get-the-boots-down-when-stopping 26.7 inches, the Interstate’s wide, cushy seat not only enhances the comfort level, but the styling as well.
Chrome Fork Covers – Custom bikes can never have too much style, as the Interstate illustrates perfectly with its brilliant, eye-catching chrome fork covers.
Windscreen – The stylish custom windscreen keeps wind and weather at bay, ensuring both rider and passenger cruise in ultimate touring comfort.
Three-Valve Dual-Plug Combustion Chamber
Heel-Toe Shifter – A handy, and old-school cruiser-style, heel-toe shifter is paired with the floorboards to make shifting through the gears a simple toe or heel tap away.
Riding an ATV can be fun. If you’re on the right ATV. One who was to ride on a Honda TRX250X will tell you this ATV is your ticket to a great day’s riding. Plus you can ride this on all sorts of terrain like Dirt, Sand, Snow and even Street. Don’t wait get on this now, its a blast!
It all starts with an engine that’s perfect for recreational ATV use: Honda’s exclusive longitudinally mounted four-stroke single. It’s built to provide plenty of torque and excellent response. In addition, Honda’s exclusive, innovative SportClutch™ minimizes the potential of stalling, yet still lets you shift for yourself. The TRX250X’s clean, reliable shaft drive is designed for years of low-maintenance, high-octane fun.
And this year the TRX250X gets some cool new graphics, so it just plain looks fun, too. Best of all, since it’s a Honda, you know it’s built to last, and that you’ll be spending more time enjoying the trails than worrying about repairs.
Important Safety Notes
Recommended for riders 16 years of age and older.
Honda recommends that all ATV riders take a training course and read their owner’s manual thoroughly.
New for 2011
- New Black color joins Red.
Unique Engine Layout. When your engine is longitudinally mounted (front to back), the driveshaft goes in a straight line back to the rear wheels. That means no twists or detours, and a more efficient power delivery.
Rugged, reliable 229cc OHV engine – Lightweight OHV air-cooled 229cc engine is longitudinally mounted, allowing direct driveshaft alignment to rear wheels for more efficient power transfer. Two-valve cylinder-head design features performance-optimized valve timing, a 31.5mm-diameter intake valve and a 27mm-diameter exhaust valve to produce a broad, usable powerband.2011 Honda TRX250X 2 400x276 The 2011 Honda TRX250X All Terrain Vehicle ATV
xclusive Honda SportClutch™ – Handlebar-mounted Honda SportClutch enables the rider to experience manual clutch actuation with the advantage of no stalling when coming to a stop. Revolutionary feature allows beginning or novice riders to learn clutch engagement points, while experienced riders enjoy the full performance of a conventional manual clutch.
Shaft Final Drive – Honda’s fully sealed front and rear driveshafts are super-strong and virtually maintenance free.The driveshafts sit inline with the engine’s crankshaft, just like your full-sized pickup truck’s.
Electric Starter – Effortless electric starter makes getting the engine started easy. Even when the engine is cold or at high altitude, all you need to do is push a button.
Reverse – asy-to-use reverse makes unloading the TRX250X a lot less hassle. Reverse can also help get you out of tight spots that you may encounter when you’re out riding.
No Stalling, No Worries. The Honda SportClutch™ is the best of both worlds. It gives experienced riders the control of a manual clutch, while others won’t have any anxiety about stalling.
Gimmie an “R.” Since the TRX250X has a handy Reverse gear, unloading or getting out of a tight spot is a snap.
Press Release
American Honda Announces 2011 Off-Road Models and ATVs
American Honda Motor Company’s Powersports Division announced to its dealers today an additional release of off-road models and ATVs for the 2011 model year. These Hondas include the CRF450R and CRF250R motocross machines, CRF70F and CRF50F off-road motorcycles, the FourTrax Rancher family of ATVs, and the sporty TRX250X.
“Honda is ramping up its release of 2011 models,” said Powersports Press Manager Bill Savino. “We’re proud to unveil our newest race bikes, the CRF450R and CRF250R motocrossers, plus a wide assortment of Honda off-road machines that have remained extremely popular with recreational riders over the years. With these models for 2011 and more to follow, this is certainly going to be a great year for riding enthusiasts.”
More detailed information and images of Honda’s model line can be found on www.powersports.honda.com or see your local Honda powersports dealer.
- The Class of the Open-Class MX Bikes: Honda CRF450R
Long regarded as the bike of choice in the big-bore motocross division, the 2011 CRF450R incorporates a host of improvements that will help this bike retain its standing as the yardstick by which all others in the class are compared.
Various tweaks to the engine tuning broaden the already prodigious powerband-more low-end pull and midrange grunt-while also enhancing throttle response via a new throttle body.
In addition, revised suspension linkage and settings yield improved control, increased ride plushness and enhanced rear-wheel traction. A new Honda Progressive Steering Damper (HPSD) with a larger damper piston (24mm versus 20mm) produces even better tracking traits than before. In addition, the CRF450R now features a newly designed muffler that meets the sound levels of 94 decibels required by some racing organizations in 2011, making it competition-legal right off the showroom floor.
All this and more make the 2011 CRF450R a shoo-in to maintain its dominant role among open-class MX bikes. MSRP $8,199. Available in Red beginning October 2010.
- The Award-Winning Honda CRF250R Gets Better Yet in 2011
Despite winning numerous comparison tests and awards in 2010, the CRF250R enters the new season sporting a number of improvements that will help it continue its winning ways. A new Honda Progressive Steering Damper (HPSD) with a larger, 24mm damper piston aids tracking precision, and new suspension settings front and rear help give this stellar-handling machine even better chassis balance for 2011. Changes to engine tuning now give the CRF250R a stronger bottom-end and midrange hit, and this 2011 model features a new muffler that meets sound levels of 94 dB required by some racing organizations. MSRP $7,199. Available in Red beginning October 2010.
- Family-Friendly CRF70F and CRF50F Return in 2011
In a completely different segment within the vast Honda spectrum, the family-friendly CRF70F and CRF50F return to the lineup in 2011. Featuring an automatic clutch, low seat height and a three-speed transmission, the CRF70F has long served as a practically perfect choice for beginning riders. Credit too the torquey 72cc air-cooled single-cylinder four-stroke engine that has grown to near-legendary status for reliability over the years. Likewise, for more than 40 years the CRF50F has introduced legions of riders the world over to the sport of motorcycling. It tips the scales at an unintimidating 110 pounds and the little CRF50F boasts a tough 49cc air-cooled single-cylinder four-stroke engine renown for its durability plus an ultra-low seat height, automatic clutch, three-speed transmission and an inverted fork. Both of these machines represent the fun that turns the dreams of beginning riders into trail-time reality. CRF50F MSRP $1,499; CRF70F $1,899. Both models available in Red beginning October 2010.
- Options, Options and More Options: FourTrax Rancher Family
Year after year, more and more ATV riders come to sing the praises of the ready-and-willing FourTrax® Rancher®-and for good cause.
This family of full-sized machines, assembled at Honda’s plant in Timmonsville, SC, has proven many times over to be the most dependable partner you could ever hope for, whether the day calls for work or fun. At the heart of each Rancher beats a powerful liquid-cooled, fuel-injected 420cc engine with convenient electric starting and plenty of grunt for getting the toughest jobs done. From there, it’s a matter of choosing the features that best fit your riding needs, conditions and desires.
Many Rancher fans swear by the base model FourTrax Rancher with its automatic clutch and manual-shift five-speed transmission with reverse because it’s such a workhorse. Other owners are equally enamored of the FourTrax Rancher ES with its remarkable Electric Shift Program (ESP®) that shifts with consummate ease with the touch of a handlebar-mounted button.
Others will allow that while these two-wheel-drive Ranchers are great, the addition of the four-wheel-drive option found in the manual-shift FourTrax Rancher 4×4 and the ESP-equipped FourTrax Rancher 4×4 ES with their easy-to use TraxLok® 4WD/2WD selector makes a good thing even better.
And then there are those who love to opt for the top-tier models, and in this case that would be the automatic-transmission 4×4 FourTrax Rancher AT and FourTrax Rancher AT with Electric Power Steering. Both of these upscale models feature five-speed auto-shifting or push-button ESP shifting, plus four-wheel disc brakes and independent rear suspension.
That’s a lot of variations on one great theme, but no matter which model you select you’ll see why Honda’s FourTrax Rancher has long remained a favorite. MSRP TBD. Two-wheel drive models available in Red and Olive; available early 2011. 4×4 models available in Red, Olive and Camo; available December 2010.
- The TRX250X Offers Full-Sized Fun
In the sport ATV category, the TRX250X delivers full-sized ergonomics and it’s also full of great features including electric starting and Honda’s innovative SportClutch™ that enables the rider to experience manual clutch actuation with the advantage of no stalling. That makes it easy to enjoy the plentiful power on tap and the five-speed transmission plus reverse for day-long adventuring. It’s no wonder that the sporty and fun-to-ride TRX250X continues to stand out as a favorite among beginners as well as longtime riders, year after year. MSRP TBD. Available in Red and Black beginning September 2010
Electric Power Steering. Honda’s Electric Power Steering features sophisticated torque sensors that measure how much force you’re applying and then tailor how much extra assist you need.
GPScape: GPS for ATVs. There are lots of GPS units out there. But only Honda offers GPScape. It’s built in, with rugged construction and a continuous power source.
The Amazing Hondamatic™. There’s no other automatic like it on any ATV. Even Hondas. You get an almost infinite choice of gear “ratios” thanks to its continuously variable design.
Accessories as tough as the ATVs they’re on. When you’re riding the best ATV on the planet, only the best accessories will do—Honda Genuine Accessories. These accessories are designed specifically for your Honda vehicle and feature the same quality and durability you’ve come to expect.
Electric Power Steering (EPS) – Electric Power Steering (EPS) is both speed- and torque-sensitive. In addition to reducing steering effort, EPS also reduces kickback through the handlebar.
Electric Shift Program (ESP) – Upshifting or downshifting is easy and fast—just push one of two handlebar-mounted buttons. ESP is a huge advantage when riding in heavy boots, or if your boots are covered in mud or snow.
GPScape – Available GPScape is a great GPS-based navigation aid designed specifically for your ATV. Oversized buttons make GPScape easy to use while wearing gloves. Since it’s hard wired into your ATV’s electrical system, you never have to worry about dead batteries.
TraxLok® – TraxLok is a shift-on-the-fly system that lets you choose between two- and four-wheel drive. Two-wheel drive gives you lighter steering, while four-wheel drive maximizes traction.
Semi-Dry-Sump Engine Design – Our semi-dry sump design and overhead valve design give you an engine that’s shorter from top to bottom. The compact engine both lowers the center of gravity and increases ground clearance.
Hondamatic Transmission – The Hondamatic is the smoothest ATV transmission you’ll ever experience. Smooth power means better traction and control in tough conditions like mud and snow.
The Hondamatic: Honda Magic.
The Hondamatic unit at the heart of the Rubicon is a unique, continuously variable automatic transmission that does the shifting for you—or, at your option, lets you choose powertrain ratios with the flick of a thumb. The Rubicon’s torque-tuned engine spins a sophisticated variable-ratio hydraulic pump, delivering power to the wheels in a seamless rush that’ll have you wondering how—or why—you ever rode without it. Just one more example of how Honda’s human engineering gives you just what you want—exactly the way you want it.
- Hondamatic transmission is a continuously variable, hydromechanical design that eliminates belts altogether. It is compact, quiet, maintenance-free and very rugged. The Hondamatic features true engine braking, unlike conventional belt-drive designs.
- Multi-function LCD digital instrumentation is compact, tough and waterproof, featuring large readouts for Hondamatic transmission modes, gear selector position, speedometer, fuel gauge, odometer, resettable tripmeter and hourmeter/clock. Instrument housing includes LEDs for Reverse, Neutral and temperature warning indicator.
- Large front and rear cargo racks are rated at 66 and 133 pounds, respectively.
- Unique rear-opening storage compartment allows access when rack is loaded.
- Waterproof accessory socket provides 12-volt, 10-amp power with a built-in temperature-type fuse.
- Uniquely designed floorboards allow the rider’s feet to grip the footrests while keeping away mud and debris.
- Triple headlight system with single 45-watt upper light and dual 30-watt lower lights with multi-reflector lenses for optimal light distribution plus a 21-watt brakelight and taillight.
- Assembled in Timmonsville, South Carolina.
- Transferable one year limited warranty; extended coverage available with a Honda Protection Plan.
Engine/Drivetrain
- Liquid-cooled overhead-valve single-cylinder 499cc four-stroke engine is mounted longitudinally in the frame, allowing direct driveshaft alignment to front and rear wheels for improved drivetrain efficiency.
- Camshaft is located adjacent to the cylinder head, reducing engine height. Together with the external engine-oil tank, engine height is further reduced for a low center of gravity and excellent handling.
- Four-valve cylinder head utilizes two short pushrods to provide a broad powerband for optimum performance and engine efficiency.
- TraxLok selectable 2WD/4WD system.
- 20-watt integrated carburetor heater for reliable cold-weather starting.
- Torque-Sensitive Front Differential.
- Standard high-flow oil cooler ensures optimal engine lubrication under difficult operating conditions.
- Stainless-steel exhaust system provides superior corrosion resistance.
- Powerful 361-watt AC generator.
- The Hondamatic transmission utilizes variable hydraulic pressure and mechanical torque amplification to provide seamless job-handling power and excellent acceleration. Engine power drives a hydraulic pump. The pump, in turn, drives a hydraulic motor with variable fluid capacity. Utilizing pump and motor pistons and a variable-pitch motor-side swash plate, hydraulic capacity and pressure are varied, producing continuously variable output speed. In addition, torque is increased as output-shaft speed is reduced.
- Electric Shift Program (ESP®) allows rider the option of push-button shifting.
- The Hondamatic is extremely efficient, with operating efficiencies ranging from 75-81 percent in full-reduction mode and from 87-92 percent when input and output speeds are the same (1:1 ratio).
Chassis/Suspension
- Dual Independent double-wishbone front suspension uses premium preload-adjustable shock absorbers to provide 6.7 inches of suspension travel for a plush, comfortable ride. Steel swingarm and dual preload-adjustable rear shock absorbers provide 6.7 inches of suspension travel for superb comfort and compliance.
- Dual front disc-brake calipers feature a patented built-in scraper system to remove mud and snow from inside the front wheel to help prevent buildup of debris between caliper and rim and ensure consistent braking performance.
- Dual Brake pads feature thick, long-wearing material with improved durability, feel and control. An internal scraper gives audible warning when pad life is low.
- Dual Powerful, single-piston caliper, front hydraulic 180mm disc brakes and sealed rear mechanical drum.
Honda Genuine Accessories
- Flag Kit
- Front 12-inch Alloy Wheel
- Rear 12-inch Alloy Wheel
Another reality was that the designers had only 3 months to realize their builds from start to finish. The Furious (Chopper), Switchblade (ProDrag) and Slammer (Bagger) debuted at the December 17th 2010 Long Beach, CA International Motorcycle show and will continue on the nationwide tour through 2011.
A 45 degree rake and converted hard tail create a clean, pure statement that is simply chopper. Metal flake, variegated leafing, and diamond stitched seat contrast with the five spoke crushers and Fury tank. Long and low, clean and mean… Furious is an instant Neo-Classic.
The custom fork is not the only thing on the cruiser is modified, the rear suspension is exchanged for a hardtail unit, which according to experts in this type of motorcycles seems to hear.
With a 23 “front wheel and 20″ rear wheel, the Furious over fairly large wheels, custom paint, a custom handmade saddle and bars on side to drag the uber cruiser feel more stress.
2011 Honda Concept Furious 2 The 2010 Honda Fury Furious (Hardtail Chopper) Concept Motorcycle
Hardtail Chopper concept from Honda Motorcycles
Furthermore, the drive shaft stripped of its protective shell, making the technology more into view, and the stock exhaust is replaced by two straight exhaust pipes.
Specs
- Stock: VT1300cc engine & tank
- Front 23” wheel Rear 20”
- Exposed shaft drive
- Hard tail custom spec frame conversion (37degree head pipe with a 8 degree fork angle offset)
- Custom oversize drag bars – Custom Paint
- Custom
- Straight pipe exhaust
- Custom Diamond stitched leather seat & rear hugger
Starting with 2010 Honda VT1300’s 3 young designers from Honda Reseach & Development Americas located in Southern Calinfornia were given the opportunity to build customs based on where their visions would take the Fury, Stateline & Sabre.
The designers were given free reign within a limited budget and 2 requirements, full on runners, and stay true to the core of the production vehicle.
Another reality was that the designers had only 3 months to realize their builds from start to finish.
The Furious (Chopper), Switchblade (ProDrag) and Slammer (Bagger) debuted at the December 17th 2010 Long Beach, CA International Motorcycle show and will continue on the nationwide tour through 2011.
Full Carbon fiber dress, racing 3 way adjustable suspension and a single sided swing arm with a 535 chain conversion optimize the single focus of this design, speed. Switchblade has a mass centralized proportion to reinforce this super sport assault.
2011 Honda Sabre Switchblade Pro Drag 2 400x302 The 2011 Honda Sabre Switchblade (Pro Drag) Concept Motorcycle2011 Honda Sabre Switchblade (Pro Drag) Specifications:
- Stock frame, VT1300cc engine & tank
- 3way fully adjustable sport suspension
- Carbon fiber custom bodywork & spec seat
- 535 Chain conversion (Before shaft drive)
- Single sided swing arm conversion
- Racing spec calipers & rotors
- Carbon Fiber 18″ rear wheel – Front wheel 21″ carbon fiber
- Onboard GPS laptimer & data acquisition unit
- Oversize Billet Top and lower bridge
- Air/Box/cleaner Conversion
The 168kg (370.3lb) (dry weight) 1198 SP creates a dream package by taking everything that the 1198 model has, including DTC, DDA and the new DQS systems, and adding top-of-the-range Öhlins suspension, lightweight chassis components, a lightweight factory team-style aluminium fuel tank and slipper clutch.
The high performance, fully adjustable 43mm Öhlins forks, which sport low friction titanium nitride-treated fork sliders, respond effortlessly to every imperfection in the tarmac. Beyond their advanced engineering solutions, one of the most important characteristics of Öhlins forks is their ability to communicate the condition and quality of the tyre-to-road contact patch, a feature that puts every rider in superior control.
The suspension set-up at the rear is complemented with a fully adjustable Öhlins TTX rear shock equipped with a ride enhancing top-out spring and mounted to a single-sided swingarm for outstanding drive and traction.
The front-to-rear Öhlins package is completed with a control-enhancing adjustable steering damper.
On any sport or race bike, the most effective area to reduce weight is its ‘unsprung weight’. These are
components like tyres, brakes and wheels. Lighter wheels have a lower ‘moment of inertia’ that is
beneficial with every direction change and application of the brakes. The 1198 SP addresses this important area by mounting 7-spoke Marchesini forged and machined wheels. Both front and rear are super lightweight and their benefit is immediately apparent. The weight saving is further enhanced with the application of a carbon fibre front fender.
The 1198 SP weighs in at 1kg (2.2lb) less than the 2010 1198 S thanks to the beautifully made lightweight fuel tank, which also boosts the bike’s fuel capacity by 2.5 litres (0.66 US gal) to 18 litres (4.75 US gal). The tank is formed in 2mm thick aluminium, brush finished and then painted and clear-coated to create a racing stripe of natural aluminium that accentuates the factory race tank feel.
The 1198 is supplied with the Ducati Data Analysis (DDA), Ducati Traction Control (DTC) and Ducati Quick Shift (DQS) systems as standard equipment. The DDA package enables the retrieval and analysis of data collected from a previous track session or road trip and DTC monitors front and rear wheel speeds to detect rear wheel-spin under acceleration and electronically reduces engine power to restore traction. DQS allows the throttle to remain open when changing-up through the gearbox, helping to save vital seconds in the pursuit of faster lap-times.
The 2011 1198 SP is available in two colour schemes. The traditional Ducati red is now supported by a new diamond black and completed with red Trellis frames and black wheels with signature red pin-striping.
2011 Yamaha YZ450F
The revolutionary YZ450F: So forward thinking everything else seems backwards.
Races are won and lost in the corners, so we designed our 2011 Yamaha YZ450F to corner better than ever, letting you turn in sooner, get on the throttle quicker and stay on it for longer.
In 2010, we rocked the MX world with the release of our revolutionary YZ450F.
The first ever production bike built around fuel injection. We moved the intake system up front, and slanted the cylinder rearward, which resulted in the most compact centre of mass ever found in a four-stroke. Instant throttle response, unprecedented balance and superior handling were by-products. The Bilateral Beam frame introduced revised geometry moving the fuel tank lower and back, while transferring more impacts to an all-new suspension and gave more feedback to the rider. And it's back for 2011 in all it's awesome glory.
Highlights
Rearward Slanted Engine
Bilateral Beam Frame
Long-Travel Rear Suspension
Engine
" "Reversed" liquid-cooled, 450cc, DOHC, 4-valve, 4-stroke, single with fuel injection and titanium valves. The engine has been tuned for excellent "drivability and controllability" one of the keys to fast lap times. The engine delivers a broad power curve with a great over-rev capacity.
" Unique engine design features a rearward slanting cylinder that is "reversed" compared to traditional designs. The FI throttle body and air box are front mounted while the exhaust exits from the rear of the cylinder. This design is used to centralize mass for excellent handling and a light feel. The other major benefit is the straight shot intake system which maximizes power output. The engine is slanted 7.5 degrees rearward.
" The "reversed" design allows for a straight intake path into the cylinder, providing maximum intake flow and efficiency for excellent power. The front positioned intake means that engine heat will have less "heating effect" on the incoming fuel charge (cooler fuel helps increase power).
" Centrally located spark plug and the 4-valve head promotes a "tumbling effect" of the inbound fuel / air for better combustion, improved throttle response and power output.
" Compact, 4-valve cylinder head design, features a 12.5:1 compression ratio. The intake valves are 36mm in diameter and the exhaust valves are 30mm.
" Lightweight titanium valves (intake & exhaust) and load-reduced oval valve springs reduce reciprocating mass for less friction, faster-revving and smoother-hitting power delivery across the rev range.
" Automatic cam chain tensioner reduces maintenance and cam chain "sliders" reduce internal frictional losses.
" High performance, light weight hollow intake and exhaust camshafts.
" The lightweight aluminium cylinder features a ceramic composite coating which is applied directly to the aluminium, eliminating the need for a heavy iron sleeve or liner. The ceramic coating insures faster, more uniform heat dissipation, reduced friction and a longer service life.
" The cylinder is "offset" relative to the crankshaft to reduce frictional losses between the piston and the cylinder wall during the power stroke. This offset design is a first on a Yamaha motocross machine.
" Crankcase design utilizes an integrated oil tank inside the cases to supply oil to the dry sump lubrication system. This design concentrates mass lower in the frame for optimum handling and lighter weight feeling. There are no exterior oil lines with this design and the internal oil tank is designed to promote air - oil separation.
" Special cylinder design features cutaways that allow the air "trapped" under the piston to enter a side chamber (or cutaway) to reduce horsepower-robbing "pumping losses."
" The crankcase also utilizes cutaways to reduce "pumping losses". The crankcase cutaways match the cutaways in the cylinder for maximum efficiency.
" Lightweight , short-skirt, forged piston provides excellent reliability, less mechanical vibration and reduced weight.
" Piston oil cooler utilizes a pinpoint nozzle that directs oil to the desired portion of the cylinder and underside of the piston, which reduces piston, cylinder and rod temperatures for great durability.
" Oil volume in the engine has been optimized to reduce weight and oil drag related power losses.
" Lightweight gear driven balancer shaft reduces vibration for improved rider comfort and less rider fatigue.
" The crankcase features a tri-axis layout for the crank, main and drive axles. This tri-axis design keeps the crankcase more compact while also centralizing mass for excellent handling. All of the shafts are positioned low in the cases to maintain a low centre of gravity.
" 5-speed transmission features "involute splines" on the transmission axles to ensure smooth shifting and instant hook-up under power. The multi-plate wet clutch features a revised clutch lever actuating arm (engine side) to reduce excess free play as the clutch heats up during a moto.
" 5-speed transmission optimizes engine performance. This 5-speed transmission provides great performance and makes the YZ450F very versatile for MX, Hare Scrambles, Super Moto, Ice Racing and Enduro type applications.
" Quick-access, lightweight magnesium outer clutch cover for fast, easy clutch maintenance.
" Keihin 44mm throttle body fuel injection system is a battery-less design for reduced weight and is designed specifically for MX applications. The 12-hole injector maximizes fuel atomization for more complete combustion and great power output. The benefits of fuel injection include constant ongoing adjustments to insure the optimum fuel - air ratio regardless of outside air temperature and altitude. Other benefits include improved starting and improved throttle response. The system is equipped a throttle position sensor (TPS), plus a range of sensors (engine temp, outside air temp and air pressure etc.). There is also a cold start and fast idle knob which doubles as an idle adjuster too.
" The injector spray pattern, spray direction and the distance to the intake valves have been optimized, while the specially designed straight intake tract helps to maximize the benefits of the FI system and overall power output.
" Optional, compact, hand held "YZ Power Tuner" allows tailoring of both fuel injection settings and ignition mapping. Nine (9) different setting points can be accessed for both the FI and ignition maps. Maps can be stored and shared with other Power Tuners if desired. The days of removing a carb to make jetting changes are gone.
" Compact, lightweight in-tank electric fuel pump
" Larger capacity ACM (alternating current magneto) is used to eliminate the need for a battery.
" Automatic decompression system ensures easy starts in any gear with no manual lever to fuss with.
" Air box (located behind the steering head) features a straight shot intake boot and a washable, dual-stage, foam air filter.
" "Tornado" design exhaust system exits from the "rear" of the cylinder. The spiral winding of the header pipe provides the correct "tuned" length and takes full advantage of the exhaust "pulse" effect to maximize cylinder filling. There is a "resonator" (or power chamber) built into the header pipe. Another benefit of this exhaust system is mass centralization
" Re-packable lightweight aluminium / stainless steel muffler has been designed to optimize the performance of the engine. Muffler disassembly is easy since the silencer bolts together with allen screws.
" Compact, lightweight, single core, dual radiators provide outstanding cooling efficiency.
" High powered ECU controls the ignition and fuel injection processes. There is also a "G" sensor system that will shut down the fuel injection system if the bike lies on its side for more than 10 seconds. There is no special procedure to re-start the bike … just kick it and go.
" Works-style race-spec "barrel adjuster" for on-the-fly clutch adjustability.
" Easy access oil filter.
Chassis
" Compact "bilateral beam" aluminium frame centralizes mass for exceptional handling. This 450cc class specifically designed frame consists of a "High Solid Die Cast" head pipe, hydro formed main rails plus various forged and extruded components. This frame is compact and offers significantly improved "rider - machine communication" (a.k.a. feedback). The engineers have optimized the balance between strength, rigidity and flex. The key goal of the chassis is faster and easier cornering … one of the keys to winning races. The engineers started with a clean sheet of paper and designed the chassis based on the requirements of a 450cc motocrosser. Note: the YZ450F frame is unique, it is not the same as the YZ250F frame.
" The rigidity balance of the frame has been optimized and features high lateral and torsional rigidity with "tuned flex" in the longitudinal direction. The result is a feeling of lightness, agility and traction.
" Lightweight, tapered, aluminium swingarm is produced using "hydro forming", a special method that uses high pressure liquid to form shapes. The shock is positioned in-line with the central axis of the bike. The swingarm pivot shaft is now 17mm.
" Lightweight removable rear sub frame is constructed of square-section, lightweight aluminium pipe. The detachable design allows easy access when servicing rear suspension components.
" Cast aluminium upper and forged aluminium lower triple clamps. Fork off set is 22mm.
" Adjustaable handlebars offer a total of 4 different handlebar positions available (thanks partly to the offset design of the aluminium handlebar clamps) with an adjustment range of 30mm, to suit a wide variety of riders.
" Pro Taper bars provide excellent strength and durability. Foam handlebar pad is included.
" 48mm, adjustable, inverted, Kayaba cartridge forks with 310mm (12.2") of wheel travel. These forks feature a twin-chamber design which means the damper unit is in a separate structure which prevents aerated fork oil from entering the inner damper assembly and reducing its damping abilities. Since the inner damper is pressurized, it also eliminates bubbles forming in the oil. Front fork adjustments include: 20-way compression damping and 20-way rebound damping. Optional fork springs are available through Genuine Yamaha parts.
" The balance between the inner and outer tubes is optimized, while the Kashima coating on the pressure tank and the piston rod reduce friction for smoother suspension performance. The cylinder diameter is 24mm for excellent primary cushioning.
" The 48mm inverted KYB fork also features a Transfer Control Valve (TCV). The TCV enhances the damping force from mid to full stroke and improves bottoming characteristics. The benefit of TCV is more precise control throughout the full suspension stroke. The TCV is located on the upside of the spring and its function is controlled by piston speed, not piston position … hence the term "Speed Sensitive fork".
" "Kashima coating" has been applied to the fork tubes to reduce friction for smoother suspension performance.
" Large "wrap-around" plastic fork protectors provide excellent lower fork tube protection. The "self-supporting" design reduces friction for smoother fork operation.
" Monocross link rear suspension system features a fully adjustable Kayaba, piggyback shock which provides 315mm (12.4") of wheel travel and features separate adjusters for high- and low-speed compression damping. The shock is now in-line with the center axis of the bike for excellent control. Adjustments include: spring preload, 30-way rebound damping, 20-way low-speed compression damping and 2 turns of high speed compression damping.
" The shock uses an 18mm diameter piston rod. Kashima coating is used in the shock body and sub tank to reduce friction and improve suspension performance during a long moto. The Kayaba shock utilizes a full rebound oil lock system for excellent suspension function and great ride quality. The shock spring location is 30mm lower than last year, reducing the centre of gravity.
" 250mm floating front wave-style disc reduces weight, improves cooling and adds style too. The disc is squeezed by a Nissin twin piston caliper fitted with lightweight aluminium pistons.
" "Shorty style" adjustable front brake lever can be adjusted to fit various hand sizes.
" Adjustable clutch lever can be adjusted to fit various hand sizes.
" 245mm rear disc brake features a "wave-type" disc. The rear disc is squeezed by a single Nissin piston caliper.
" Lightweight, compact, integrated Nissin rear master cylinder (fluid reservoir is integrated into the top of the master cylinder) provides strong stopping power with excellent feel and control.
" The rear caliper and the lower portion of the wave disc are protected by heavy duty plastic protectors.
" Compact body work includes front number plate, front fender, rad shrouds, fuel tank, side panels and rear fender which enhance the lightweight feel and look of the YZ450F. This "minimal design" bodywork is a flat design, allowing for fast, easy rider movements. The ergonomics provide a natural and roomy riding position. The body has been designed to maintain it good looks throughout the life of the machine.
" Revised. lightweight, plastic resin 6.2 litre fuel tank is located mostly under the seat, once again reducing the centre of gravity and centralizes mass for exceptional handling performance.
" Lightweight Sun Star rear sprocket.
" Lightweight, 21" front and 19" rear Excel rims provide exceptional durability and help reduce unsprung weight for optimal suspension performance and handling.
" Large 25mm rear axle and a hub design which features a second bearing on the sprocket side for increased rigidity.
Details
" Polypropylene engine and water pump guards reduce weight.
" Lightweight, extra wide foot pegs provide excellent grip and ground clearance.
" Folding shift lever tip helps prevent damage.
" Stainless steel, inner clutch cable provides excellent strength and long life.
" Lightweight chain guide / support helps reduce chance of chain derailment. Also helps protect rear sprocket damage too.
" Heavy duty rubber swingarm protector
" Heavy duty DID 520 drive chain
" Convenient oil level sight glass
2011 Yamaha YZ450F - USA Specifications
MSRP* $8,250 (White/Red) Available from September 2010
$8,150 (Team Yamaha Blue/White) Available from September 2010
Engine
Type 449cc liquid-cooled DOHC 4-stroke; 4 titanium valves
Bore x Stroke 97.0 x 60.8mm
Compression Ratio 12.5:1
Fuel Delivery Yamaha Fuel Injection (YFI), Keihin® 44mm
Ignition CDI
Transmission Constant-mesh 5-speed; multiplate wet clutch
Final Drive Chain Drive
Chassis
Suspension / Front KYB® Speed-Sensitive System, inverted fork: fully adjustable, 12.2-in travel
Suspension / Rear KYB® Fully adjustable single shock; 12.4-in travel
Brakes / Front Hydraulic single disc brake, 250mm
Brakes / Rear Hydraulic single disc brake, 245mm
Tires / Front 80/100-21-Dunlop® D-742FA
Tires / Rear 120/80-19-Dunlop® D-756
Dimensions
Length 86.3 in
Width 32.4 in
Height 51.6 in
Seat Height 39.3 in
Wheelbase 58.7 in
Ground Clearance 15.0 in
Fuel Capacity 1.63 gal
Wet Weight*** 245 lb
Other
Warranty 30 Day (Limited Factory Warranty)